Request a Quote on Test Equipment Products like Components Corp Part Number TP-104-03-07 Today!

Mfg Part Number : TP-104-03-07

Manufacturer : Components Corp

Main Category : Test And Measurement

Category : Test Equipment

Sub Category : Through Hole Mount Test Points

Description : The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations.

Thank you for your interest in the parts that we offer here on Electromechanicals Distributor. You have reached the RFQ page for part number TP-104-03-07, a Components Corp item that is listed alongside the description “The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations.” If you are interested in this particular item and would like to learn more about your purchasing options, please be sure to fill out and submit the form provided below while presenting us with important information such as your target price and expected shipping time frame. Once we receive and review your completed form for part number TP-104-03-07, you can expect a tailored response from one of our industry experts in a matter of 15 minutes or less.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

We at Electromechanicals Distributor are committed to the quality of our offered Test Equipment parts, choosing to only stock The New Tp-104 Series Takes Components Corporations Highly-Efficient And Economical Loop Configured Test Point Design One Step Further, By Adding A Plastic Standoff That Boosts Visibility And Allows For Easy Polarization And Identification. The Tp-104 Incorporates All Of The Design Features Of All Component's Test Points - Solid Non-Slip Grip Of Test Clips And Probes, Low Profile, Single Hole Wavesolderable Mounting, And The Elimination Of Skin Punctures Suffered By Users Of Wrap Posts As Substitute Test Points. The Tp-104 Is Furnished In 30-Position Breakaway Strips With 0.125" Centers That Make Storage, Handling And Even Tandem Installations A Snap. Component's Special Hand Tool #1040 Further Enhances Board Mounting With Test Point Separating, Gripping And Positioning Functions Accomplished In One Easy Motion. Standard Tp-104 Colors Are Red And Black, With Special Colors Available On Order. The Tp-104 Can Be Ordered Pre-Cut To Any Number Of Positions Up To 30. Individual And Tandem Units Hold Securely When Inserted In .062" Diameter Holes For Soldering Operation. The Rectangular Passage In The Tp-104's Molded Standoff Maintains Wire Form Alignment, Important In Tandem Installations. and other items from vetted manufacturers we trust, such as Components Corp and others. Furthermore, we carry out varying levels of testing and inspection for our inventory, guaranteeing the fit, form, and function of every purchase. Alongside other similar practices, Electromechanicals Distributor operates with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With this in mind, do not hesitate to begin the purchasing process for part number TP-104-03-07, knowing that we will serve you as your strategic sourcing partner for all your operational needs.

Related Electromechanical Components of TP-104-03-07

TP-002
Connectors
Other

TP-10-453-2
Concord

TP-10015
Honeywell

TP-100AU
Connectors
Other

TP-101
Connectors
Other

TP-101-01-04
Components Corp

TP-101-01-09
Components Corp

TP-101-10
Through Hole Mount Test Points
Components Corp

TP-101-10-T
Through Hole Mount Test Points
Components Corp

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions